number37

About

Username
number37
Joined
Visits
1,577
Last Active
Roles
Member

Comments

  • Have you tried doing a full power-off and back on of your device? You can also try uninstalling and reinstalling the files app. You won't lose any files. But to be safe you should be sure to have a full backup of your device.
  • There's an app called MultiTrack Recorder that can be used in place of audio tracks. It's not ideal, but can work. The biggest limitation is you can't record directly into it from outside of NS2. You can send NS2 tracks to it. You can import audi…
  • I’ve run into issues before when I’ve forgotten that a device was connected to more than one place. Also, if there are non-midi pairings between the devices, they can interfere with BLE Midi connections. If you have any standard parings, cause both …
  • There’s no search that I know of. You can tap the numbers at the right of the list to jump to different parts of the list if that helps.
  • @mre8 said: I want to send midi over bluetooth from NS2 to my MacBook. I set up Bluetooth in Audio Midi Setup on mac and advertised the port. In nano studio settings, my Macbook is seen. When I select it in nanostudio, I get a connecting message …
  • Map the parameters of those knobs to macro knobs and record the movement of those. See the section "Macro Tools" in the manual: https://www.blipinteractive.co.uk/nanostudio2/user-manual/AUInstrument.html
  • https://www.blipinteractive.co.uk/community/index.php?p=/discussion/1884/any-news-it-s-been-a-while#latest
  • @kleptolia said: Any news on audio tracks? That’s the only thing that has driven me back to GarageBand. And I do know about the sampler. I just like recording into audio tracks, I’ve found. https://www.blipinteractive.co.uk/community/…
  • @Quickpull - yes, it’s still a thing. Here’s one workaround that will work for iPhone if you have AUM: https://www.blipinteractive.co.uk/community/index.php?p=/discussion/comment/11254/#Comment_11254
  • @Cray23 said: @starkfvx autobeat is beat repeater aka note repeat, where you set timing and while holding pad down it re trigger it, like arpeggio but without octave, gate etc just timing (although it could have other parameters too) so if set to…
    in AUTOBEAT Comment by number37 February 25
  • No need to apologize for asking questions! You can record the changes, but you have to first map the control you want to change to one of the eight Macro (Performance) Controls. You then move the macro controls, which move the controls in the a…
  • @starkfvx said: I have noticed that synths sound slightly different when launched standalone vs when loaded as an AUv3 in Nanostudio 2. Also sound recorded from Nanostudio 2 with the use of Audioshare's Recorder, when played back sounds a bit…
  • Mozaic is at least as flexible as Streambyter, and (at least for me) more accessible to learn. There are a couple of Mozaic scripts available already that may be close to what you're looking for: https://patchstorage.com/note-probability/ https:…
  • I haven't tried it, but you might check out Acrosync - claims to be rsync for iOS. The idea would be to keep a master copy of the NS2 folder on the Mac, then sync to it from one device, then sync from it to the other device. Just theory - not tes…
  • I was trying to be helpful. No need to be a dick.
  • @bluemoononwunday - No developer I know of on any forum or social media has been able to shed light on when Apple will fix this.
  • It's an iOS 14 thing. Still not fixed. The solution that sometimes works in other hosts is to request the list of IAA plugins then go back to check the AUv3's. But of course you can't do that in NS2, so reboot is the only option. The AUM develope…
  • https://www.blipinteractive.co.uk/community/index.php?p=/discussion/1500/is-this-how-it-ends/p1 ... Unfortunately, NS2 does not record cc data with nearly enough resolution to playback what was entered. Lots of zipper noise and worse on playback.…
  • I don't think zipper noise affected by device performance. I think it may be caused by by NS2 not recording the automation at a high enough resolution, so it's basically quantized. At least that's what I remember reading in an earlier thread somewhe…
  • @Cray23 said: I know about 4Gb ram but that’s same as my old pro so that should be just fine;) as if I increase latency to full it can handle more so I guess ram should be ok. As long I’m not using tons of long samples. Side note: a few A…
  • Is Background Audio enabled in both apps? It's under Advanced Settings in Gadget.
  • Probability per note in the piano roll would be super nice. I envision it being edited per note as velocity is now. That’s different than modifying the overall probability of a particular pad playing with a Mozaic script, though that’s fun to do …
  • I’m not a developer. Be aware that surely much of what follows is poorly explained at best, and completely wrong at worst. So now we are getting to heart of the question of whether more cores equals better performance for audio apps. I know t…
  • @boomer said: Thanks @Stiksi . That link clarifies a lot. I can see why @Cray23 came to like the new iPad Air over the pro. That’s where I am leaning now also. So that leaves the questions around why apps like ns2 can only use one core? If a de…
  • Do you mean the "recording trigger slide out" below? If so then, it has nothing to do with iOS 14. That's a part of Audiobus. Sorry, but there's no way to have it without Audiobus.
  • @Treysonik said: Hello, this is my first post! I looked in the manual and cannot find any info on how to change the sample rate in settings. I am using an iPhone 7 Plus and when I go to the settings section it says my sample rate is 48.0kh…
  • @Blip Interactive said: He liiiiiives! How've you been mate? Yes I live, and I'm better now I'm no longer a reluctant home school teacher - thanks for asking! I must say this whole iOS 14 thing's a bit disappointing…
  • @BjørnFelle said: thanks man, song position is essential in this case so I will have to look for an alternative at least I know it’s not possible Um ... good luck with that one. I don't know of anything on iOS that does follow SPP. Maybe…
  • For song position you're out of luck. NS2 doesn't support it, and no word has come down on when any update will be released, and no word other than audio tracks on what is planned. For midi clock sync and start/stop you can load NS2 into Audiobus…
  • To reduce latency and simply setup, you can: * Add a track or the plugin you want to play * Set this track to receive midi always. * Add a midi out track * Add the MIDI Route plugin from MIDI Tools Suite as a MIDI Fx. * Set the Destination …