Will

About

Username
Will
Joined
Visits
556
Last Active
Roles
Administrator

Comments

  • Presuming Eden doesn't have any modulation or filters (or, etc...) applied, the sound of the sample should be the same in Eden as it is in the TRG. What do you mean by "sounds better"? I don't have access to Eden at the moment. I can't recall if …
  • @Stiksi said: And on a lighter note, Ableton just fixed the same issue with Live 11. That only took 3 years and cost around 150€ to upgrade 😀 "on a lighter note..."
    in Light mode? Comment by Will March 19
  • @alexo said: Here's my experiences with the sync: Figuring out the correct options for rsync took me a few attempts: rsync -n -rcv --no-whole-file --inplace --delete --exclude=".*" "$SOURCE" "$DEST" This is interesting. Are run…
  • Closing as a duplicate of https://www.blipinteractive.co.uk/community/index.php?p=/discussion/1880/
  • Hiya. Welcome to the app/forum. You've got it. There is no close function. Just open the next file and save or don't save as you go. Same thing as "close".
  • @MisplacedDevelopment said: Using lanes instead of tracks sounds a good idea so I’ll take that snippet of advice. The one minor drawback of using lanes for this is that you can't mute individual track lanes via the track header like you c…
  • I can't think of a better/faster/easier way than your current "Approach 1". fwiw, you should be able to store a "master copy" of the original as a separate track lane (instead of a new track), muting the clips you want to keep as a back up, but t…
  • @Zupi said: 😱 Quite possibly you got the first ever printed NS2 manual in the world! 😄 👍👍👍 With a very handsome binding no less!
  • @Cray23 said: @starkfvx autobeat is beat repeater aka note repeat, where you set timing and while holding pad down it re trigger it, like arpeggio but without octave, gate etc just timing (although it could have other parameters too) so if set to…
    in AUTOBEAT Comment by Will February 25
  • @Stiksi said: @starkfvx said: Definitely and I guess this does not require changing whole a lot in the code of the app. It’s actually a pretty huge undertaking. Yep. It basically requires audio tracks to be com…
    in Freeze tracks Comment by Will January 12
  • You could also move the sample to an Obsidian instance and use a random LFO to control volume and/or filter frequency and/or whatever you want to randomize. If you also assign a macro knob to that LFO's "Level" control, you can automate the "amou…
  • +1 on the "personality" of Eden. Absolutely true!
  • Solid "What Stiksi Said" thread right here. Mainly because I've always really admired his mixing chops. In case you want to keep it all NS, I'll just add this... as mentioned, NS' EQ and Compression are super transparent so don't be afraid to st…
  • Love this sort of thinking but probably best as a MIDI FX. There are a few out there. I tend to use http://www.artkerns.com/midifiltrpg.html most often. Reading this post though made me think that this is probably a good use case for custom Mozia…
  • Another member of team hoping-for-aftertouch here. Mono aftertouch would be plenty for my needs. Would really expand the playability of the synth. One of these days! If "note repeat" ever lands in Slate, aftertouch would be an obvious/delightful …
    in MPE Support Comment by Will October 2020
  • @NIELS_ON said: Yeah, i heard about. But i need the controls close to the drumpads to switch between 16th and 8th notes etc. fast while switching between pads etc. for a Arpeggio with a synth this is a nice solution. Agreed. Live switchin…
  • Fingers crossed.
  • Totally agree that cc123 would be a good and "proper" thing for NS to support but think you're probably correct about Akai being lazy here. I've used NS as an multi-timbral synth with a variety of external sequencers and can't recall anything like t…
  • That said, +1 to the original request. Especially if could be set per MIDI input port. I imagine lots of folks have a few different pad controllers. Loopy and AB3 kindly work this way—the MIDI mappings are saved per port.
  • Nice, thanks for sharing @BearBazooka. Another solution: use a MIDI mapper. I don't think these will work within NS* but you can host one in something like AudioBus or AUM. Point your controller at the hosted AU within AB/AUM and then point AB/AUM a…
  • @duresq said: I have AUM Will I'll try that lol man if you were around the corner I'd be knocking on the door to watch your flow. Thank you for the help 👍 It would be hard to see the iPad screen from 6 feet away anyway.
  • I can both confirm that MIDI clock sync has 1) been on my wishlist since beta testing the app and 2) AB3 MIDI clock<-->Link works really really well. Sure, not as elegant as native MIDI clock output but there's always something in every syn…
  • Not at the moment, no. Would be handy though!
  • @Trigger_the_Monkey said: TtM again thanks man for taking the time to respond with genuinely useful information and for others that read this. At the moment with the limited time I have I am trying to use a project as a learning tool, experiment…
  • @duresq said: @Trigger_the_Monkey said: @duresq good to hear! The more you experiment the more you'll achieve in my opinion. Keep going any you definitely will start creating music worth sharing. No doubt I'll be back wi…
  • Just a little NS jam/work break. Found myself wanting this feature even more after reading this thread earlier. So, I blame you, @rory. UI-wise, I could see it working in any of a few different ways. * As an additional state in the "Auditi…
  • Really like this idea.
  • You can also use the Slate hamburger menu to copy a single pad from one Slate instance to another.
  • Note: I would be happy to chip in some $$$ or purchase one of these controllers for you as an incentive/aid to add the following feature requests. ^ How to do a feature request properly. Respect!